I love Bayard fountain pens - but they used some very shrinkage-prone celluloids.
Yes, they're very colourful and characterful celluloids. But they shrink.
Quite often you'll find a little bump around the lever axle. That's not a problem.
What is a problem is that the lever won't actually close any more.
There are a few things that help.
Yes, they're very colourful and characterful celluloids. But they shrink.
Quite often you'll find a little bump around the lever axle. That's not a problem.
What is a problem is that the lever won't actually close any more.
There are a few things that help.
- First, take any rust or dirt off the sides of the lever. Micromesh or very fine (500+) sandpaper can help, but go very gently. Not recommended if you have a nice plated lever, but if it's brassed and rusty, do what it takes.
- Secondly, with a fine pair of pliers, if the lever is still not fitting properly, close down the 'ears' at the top end a little. They have bumps on them to ensure the lever stays flat once engaged, and that may be what's stopping the lever lying fully flat.
- If you still can't make the lever flatten nicely, it could be the other end that's the problem. You can generally work that out by just feeling where it's sticking, as you move it around gently. In that case, the lever slot needs to be a bit longer. Take a thin jeweller's file, or make a sanding stick by supergluing fine grit (300+) sandpaper to a cocktail stick / toothpick. Then file the 'nib end' of the lever slot till the lever fits positively.
I got all my Excelsiors working nicely. Hurrah!
